Snapshot of Battery Technology for Plug-in Hybrid Electric Cars
Click the image to expand.
UC Davis’s Institute of Transportation Studies has prepared a sort of primer for “non-battery experts” on the pros and cons of different battery technology for use in plug-in hybrid electric cars (PHEVs). The report, called Batteries for Plug-in Hybrid Electric Vehicles (PHEVs): Goals and the State of Technology circa 2008, discusses:
- the basic design concept of PHEVs and inherent trade-offs in different battery technology.
- the current state of the most common battery chemistries, including nickel-metal hydride (NiMH) and lithium-ion (Li-Ion), and their abilities to meet the needs of PHEVs
- potential trajectories for further improvement in battery technology
While not intended to be a definitive analysis, the report makes four conclusions:
- PHEV battery “goals” vary according to differing assumptions of PHEV design, performance, use patterns and consumer demand
- Battery development is constrained by inherent tradeoffs among five main battery attributes: power, energy, longevity, safety and cost
- Li-Ion battery designs are better suited to meet the demands of more aggressive PHEV goals than the NiMH batteries currently used for HEVs
- The flexible nature of Li-Ion technology, as well as concerns over safety, has prompted several alternate paths of continued technological development. Due to the differences among these development paths, the attributes of one type of Li-Ion battery cannot necessarily be generalized to other types
As PHEVs become more popular, it may be useful to understand the basics of battery technology. Most of us hear primarily about Li-Ion batteries for new plug-in model electric cars, but it turns out there are at least 8 types of Li-Ion batteries undergoing testing for automotive applications: lithium nickel, cobalt and aluminum (NCA), lithium iron phosphate (LFP), lithium nickel, cobalt and manganese (NCM), lithium manganese spinel (LMS), lithium titanium (LTO), and manganese titanium (MNS and MS).
While not understanding the technical details of this won’t affect your ability to buy a Chevy Volt, it’s interesting background information, and it gives us an idea of what electric-drive auto manufacturers are seriously evaluating right now.
Posts Related to Plug-in Hybrid Electric Cars:
- Chevy Volt’s Lithium-Ion Batteries Road- Tested By Month’s End
- Get 120 MPG Out of Your Prius (Plug It In)
- Without Clean Electricity, Plug-In Vehicles aren’t So Hot
Source: Axsen, Jonn, Andrew F. Burke, Kenneth S. Kurani (2008) Batteries for Plug-in Hybrid Electric Vehicles (PHEVs): Goals and the State of Technology circa 2008. Institute of Transportation Studies, University of California, Davis, Research Report UCD-ITS-RR-08-14.
Via: Green Car Congress
[...] Snapshot of Battery Technology for Plug-in Hybrid Electric Cars Hybrid Hacks and Toyota Yawns? A Biodiesel Prius? VW To Release 69.9 MPG Diesel Hybrid Will Plug-In Hybrids Become the Standard? [...]
What is efficiency of charge discharge cyclde at practical rates of charge and discharge?
What about EEStor and their super capcitor battery? I think they deserve a mention, especially as they have the capacity to out perform any of the battery technologies in this snapshot.
[...] the way to 112 mph. The electrical system is powered by lithium polymer batteries, which is another variation on lithium-based systems I’ve highlighted before. The X1 has a 100 mile range and reaches an overall equivalent of 175 [...]
[...] this post? Subscribe to our RSS feed and stay up to date.Plug-in hybrid, all-electric or fuel cell? Car-makers are hedging their bets on what will emerge as the next [...]
Thanks for the information and conclusions about the different battery technologies. I’m hopeful that we’ll have a number of plug-in hybrids available soon from major manufacturers, in the US and around the world.
For a concept car that combines plug-in hybrid and turbo diesel technology, VW seems to be in the lead, though not in a way that will necessarily affect the US.
Lead-acid batteries and ZEBRA batteries have both powered hybrid electric vehicles. The ZEBRA has the highest energy density and is being used in the TH!NK with 100KM plus range. A single lead acid OASIS from Firefly has enough energy in it for more than six miles in a converted Prius, but the power rating from a single unit at this capacity is one half horsepower or about two miles an hour. The battery is capable of much higher power but at a large energy loss. Five Oasis units would give a Prius plus 30 miles of range for 350 pounds. The Firefly technology should be optimized into the EFFPOWER’s bipolar high power high voltage units for much better power and energy density. ZEBRA batteries are far more energy dense and compete well on this point with commercial Lithium batteries. High capacity batteries are not a problem for plug-in-hybrid vehicles; the cost of the electric drive is a very big problem and this is because of the lack of high volume production and competition. Just like regular cars, another problem is too large of motors. Low mileage plug-in-hybrids will meet the needs of most people and will achieve most of the energy savings that longer distance versions would.
Full electric cars are a product of ignoring engineering and economic realities and should be forbidden because they perpetuate the falsehood about limited range and the false non-availablility of adequate batteries. ..HG..